Ricoh S-C3 F - Postscript3 Installation; Wireless LAN (IEEE 802.11 B) Installation

PostScript3 Installation
• Unplug the machine power cord before starting the following procedure.
Installation Procedure
1. Install the PostScript3 SD card into the slot 2 [A].
2. Turn on the main power switch.
3. Print out the configuration page (User Tools/ Counter > Printer Features > List/ Test Print), and then
check that this device is detected.
4. Attach the "Adobe PostScript3" decal to the front cover of the machine.
Wireless LAN (IEEE 802.11b) Installation
• Unplug the machine power cord before starting the following procedure.
1. Installation
36
1