EasyManua.ls Logo

Ricoh S-C3 F - GW SC Code Descriptions

Ricoh S-C3 F
317 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GW SC Code Descriptions
SC6xx
No.
Definition
Symptom Possible Cause/Countermeasure
630 D
CSS communication error
The machine tries to communicate with
one of the terminals of a relevant service
center. An error signal returns.
Communication error on the public
telephone network (logged only; the
machine can still operate)
632 C
MF accounting device error 1
The machine sends a data frame. No
normal end signal returns. This
symptom happens three times.
Defective or broken line between
machine and device
633 C
MF accounting device error 2
The machine is communicating with the
accounting device. The break signal
returns.
Defective or broken line between
machine and device
634 C
MF accounting device error 3
A backup RAM error is reported from the
accounting device.
Defective accounting device
controller
Defective battery in the accounting
device
635 C
MF accounting device error 4
A battery voltage error is reported from
the accounting device.
Defective accounting device
controller
Defective battery in the accounting
device
636 SD Card Error
-001 B
Expanded authentication module error
There is no expanded authentication
module in the machine.
1. Install the correct SD card or the file of
the expanded authentication module.
4. Troubleshooting
116
4

Table of Contents

Related product manuals