B
[0001-0015] [000A-000D]: Detailed error code
During the boot monitor program and
self-diagnostic, any exception or cut-in
are not supposed to happen. If these
happen, it is defined as SC.
• Defective CPU device
• Defective boot monitor program or
self-diagnostic program
1. Replace the controller board.
2. Reinstall the system firmware.
B
[00FF]: Detailed error code
Cache access error in the CPU
• Defective CPU
• Defective local bus
1. Turn the main power switch off and on.
2. Reinstall the system program.
3. Replace the controller board.
B
[0601, 0602, 0605, 0606, 0607, 0609]: Detailed error code
Exceptional command does not
operate even though it is executed on
purpose.
• Defective CPU devices
1. Replace the controller board.
B
[060A-060E]: Detailed error code
Cut-in command does not operate
when it is executed.
• Defective CPU devices
• Defective ASIC devices
1. Replace the controller board.
B
[0610]: Detailed error code
Timer cut-in does not operate even
though it is set.
• Defective CPU devices
1. Replace the controller board.
B
[0612]: Detailed error code
Cut-in in ASIC occurs.
• Defective ASIC
• Defective devices in which ASIC
detects cut-in.
1. Replace the controller board.
B
[06FF]: Detailed error code
4. Troubleshooting
120
To Next Page
Loading...
