Ricoh S-C3 F

001 Copy
002 Fax
003 Scanner
4931*
Sharpness-Solid [–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP4-921.
001 Copy
002 Fax
003 Scanner
4932*
Sharpness-Low ID [–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP4-921.
001 Copy
002 Fax
003 Scanner
4935* Color Image Adjust
001
Main Scan MTF Level [0 to 3 / 0 / 1/step]
Adjust the MTF level for the main scan. This setting is only activated for the specified mode
with SP4-921-004.
0: None, 1: Weak, 2: Middle, 3: Strong
002
Main Scan MTF Strength [0 to 5 / 0 / 1/step]
Adjust the MTF strength for the main scan. This setting is only activated for the specified
mode with SP4-921-004.
0: 1, 1: 1/32, 2: 1/16, 3: 1/8, 4: 1/4, 5: 1/2
003
Sub Scan MTF Level [0 or 1 / 0 / 1/step]
Turns on or off the MTF for the sub scan. This setting is only activated for the specified mode
with SP4-921-004.
0: No, 1: Yes
5. Service Tables
150
5