Ricoh S-C3 F

1: No removal applied.
2 to 5: Removal applied at the level specified here. The higher the setting (level), the less
clear the image will become (more texture removal). This setting is only applied to the
originals in SP4-921.
001 Copy
[0 to 6 / 0 / 1/step]002 Fax
003 Scanner
4927*
Line Width Correction
Adjusts the line width correction algorithm. Positive settings produce thicker lines; negative
settings produce thinner lines. This setting is only applied to the originals in SP4-921.
001 Copy
[–2 to 2 / 0 / 1/step]002 Fax
003 Scanner
4928*
Independent Dot Erase
Selects the dot erase level. Higher settings provide greater erasure. This setting is only
applied to the originals in SP4-921.
001 Copy
[–2 to 2 / 0 / 1/step]002 Fax
003 Scanner
4929*
Positive/Negative [0 = No, 1 = Yes]
Inverts white and black. This setting is only applied to the originals in SP4-921.
001 Copy
002 Fax
4930*
Sharpness-Edge [–2 to 2 / 0 / 1/step]
Adjust the clarity. This setting is only applied to the originals in SP4-921.
Service Program
149
5