File Type Description Suffix Name
configurations of the
instrument.
Preferences File
A file that saves the
current system
configurations.
*.prf
Measurement Data File
A file that saves the
current measurement data.
*.dat
Table with Separator
An Excel file that saves the
current measurement data
in the form of a table.
*.csv
Image Saving
In
Figure 5.77
, click or tap the drop-down button of Type to select "Image". The
image parameter setting is displayed, as shown in
Figure 5.77
.
• Format
Click or tap the drop-down button of Format to select "*.png", "*.bmp", or
"*.jpg" from the drop-down list. Then the image will be saved to the internal or
external memory in the specified format.
• Invert:
Click or tap the ON/OFF button for the Invert menu to enable or disable the
image color invert.
• Color
Click or tap the ON/OFF button for the
Color menu to select whether to save the
image in color. When you click or tap to select
ON, the image is saved in color
format. If you select OFF, the image is saved in black-and-white format.
• Header
Click or tap the ON/OFF tab for the
Header menu to enable or disable the
display of the header. If you select "ON", the image creation date and relevant
information will be displayed in the header of the image when you save the
image file.
• Set the file name
Click or tap the input field of
File Name to input the file name to be saved with
the pop-up virtual keypad. The length of the file name shall not exceed 8
characters.
• Set the file path
Click or tap the input field of
File Path, then the disk management interface is
displayed. Select the desired destination storage directory, then click or tap OK
to set the storage path.
• Overwrite
Front Panel Operation
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DM858 Series User Guide
111
To Next Page
