Rigol DM858 - To Use the Built-In Help System

Select a Disk
Before using the external storage device, make sure that a USB storage device (FAT32
format, flash memory) is connected correctly.
By default, the contents in "<C:\" are displayed. If an external storage device is
inserted, in the "Disk Manager" interface, two available storage disks can be selected
in the disk selection area: "<C:\" and "Removable USB Disk (D)". If you select an
external storage device, for example, if you select "Removable USB Disk (D)", the
contents in USB Disk (D) will be displayed.
Select a File
Before operating on the file or folder, first select the desired file or folder.
Click or tap the check box at the left side of the folder, if checked, it is selected, with
an icon
being displayed. Click or tap the check box again to deselect it. The check
box restores its original state.
This instrument supports selecting multiple files or folders to operate on. You can also
click or tap the square icon with a tick in it at the upper-right corner of the interface
to select all the files and folders under the current disk. Click or tap it again to
deselect all the files and folders.
Cut, Copy, or Paste a File or a Folder
• Cut a File or Folder to a Specified Directory
Select a specified file or folder. Click or tap
Cut and then open the destination
path. Then click or tap
Paste to complete the operation.
• Copy a File or Folder to a Specified Directory
Select a specified file or folder. Click or tap Copy and open the destination path.
Then click or tap
Paste to complete the operation.
To Delete a File or Folder
In the current directory, select the file or folder to be deleted. Click or tap Delete,
then a prompt message "Are you sure to delete?" is displayed. Click or tap
OK to
delete the file. Click or tap Cancel to cancel the deletion operation.
To Rename a File or Folder
Select a specified file or folder, then click or tap
Rename to input a new filename or
folder name with the pop-up numeric keypad. Then, the rename operation is
completed.
5.13 To Use the Built-in Help System
This instrument provides the built-in help documentation. To access the help
documentation, perform the following operations:
Front Panel Operation
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DM858 Series User Guide
117