Roche Diagnostics
Operator’s Manual · Version 3.0 17
Multiplate® analyzer 1 Safety
Safety precautions
o Use the analyzer indoors only and avoid heat and humidity.
u See Environmental conditions (p. 62).
o Perform maintenance according to the specified intervals to maintain the
required operating conditions for the analyzer.
o Keep the Operator’s Manual in a safe place to ensure that it is not damaged and
remains available for use. It must be easily accessible at all times.
Approve d parts Use of non-approved parts or devices may result in malfunction and may render the
warranty null and void. Only use parts and devices approved by Roche.
Approved accessories Use of non-approved accessories may result in malfunction. Only use accessories
approved by Roche.
u See Consumables and accessories (p. 64).
Third-party software Installation of any third-party software that is not approved by Roche Diagnostics
may result in incorrect behavior of the analyzer. Do not install any non-approved
software. Non-compliance will void the warranty.
u See Setting up the software (p. 34).
Miscellaneous safety precautions
Power interruption A power failure or momentary drop in voltage may damage the analyzer or lead to
data loss. Perform regular backups of measurement results. Do not switch off power
while the computer equipment accesses the hard disk.
Analyzer unused for an extended
period of time
If the analyzer is not used for an extended period of time, it must be shut down and
switched off. Handle the reagents as described in their respective package inserts. For
further information, call your Roche Service representative.
To Next Page
Loading...
