Roche Diagnostics
Operator’s Manual · Version 3.0 25
Multiplate® analyzer 1 Safety
Safety labels on the equipment
Safety labels on the equipment
A warning label has been placed on the analyzer to draw your attention to areas of
potential hazard. The label and its definition is listed below according to its location
on the analyzer.
q
If the label is damaged, it must be replaced by Roche Service representatives. For
replacement labels, contact your local Roche representative.
Figure 1-1 Safety label on the analyzer
Label Hazard definition
ABiohazardwarning
This label indicates that there are potential
biohazards within the vicinity of this label.
o Follow standard laboratory practices for working
with biohazardous materials.
A
To Next Page
Loading...
