Roche Diagnostics
Operator’s Manual · Version 3.0 85
Multiplate® analyzer 4 Software
Menu options
Screenshot
f Tools > Screenshot
Use this function to save an image of the current screen. You do this for example
when the measurements are complete, or you might want to generate a screenshot of
the device status in a case where there is something wrong with a measurement and
then send it to your Roche Service representative for analysis. The image file is saved
in PNG format to the data folder C:\Multiplate\Data\Screenshots. The Screenshots
folder is subdivided into folders for each year, month, and day when a screenshot was
made.
When the option Edit screenshot name is enabled in Configuration > Edit analyzer
configuration > Display / print, you can enter a name for the image before saving.
The entered name is added to the standard image name (date and time when the
screenshot was taken).
To Next Page
Loading...
