Roche Diagnostics
30 Operator’s Manual · Version 3.0
2 Installation Multiplate® analyzer
Unpacking the analyzer
Unpacking the analyzer
Place the analyzer on a clean flat surface and remove the protective cover from the
analyzer and the reagent holder. Check off the delivery contents using the following
list. If there are items missing or damaged, immediately contact your Roche Service
representative.
Analyzer package m 1 Multiplate
®
analyzer
m 1 Reagent holder
m 7 Sensor cables (5 + 2 spare)
m 1 Analyzer power cable
m 1 PC-Mouse
m Diluent preheating tubes
m 1 Pipette holder, including four 8 mm Allen screws (2 + 2 spare) and 1 Allen
wrench
Monitor, printer, keyboard, electronic pipette, pipette tips, pipette cable, Roche-
provided firewall, and barcode reader have to be ordered separately.
To Next Page
Loading...
