Roche Diagnostics
Operator’s Manual · Version 3.0 67
Multiplate® analyzer 4 Software
Introduction
Introduction
The analyzer is designed to ensure ergonomic, efficient, and safe handling.
Using keyboard shortcuts
You can enter information and invoke commands using the keyboard and mouse.
Commands can also be invoked using keyboard shortcuts.
Function keys Use the function keys for the following main tasks:
Keyboard shortcuts Use the following keyboard shortcuts for the menu commands:
Function key Command
F1 Start the electronic pipette
F2 Start and stop the timer
F3 Start measurements
F4 Enter tests and patient IDs
F6 Print
F7 Clear channels
F8 Make a screenshot
F9 Worklist
Table 4-1 Function keys
Menu Shortcut Command
Multiplate Ctrl+? About
Ctrl+V Lock/unlock channels
Ctrl+E Start electronic QC
Ctrl+Q Exit
Measurements F3 Start measurements
Ctrl+S Stop measurements
F7 Clear Channels
F4 Enter test/ID
F1 Autopipette
F9 Worklist
Ctrl+K Switch curve mode
Tools F2 Start timer or Stop timer
F8 Screenshot
Ctrl+M Export measurements
Ctrl+N Export graphics
Ctrl+L Li quidtrans
Ctrl+3 Show analyzer status
Ctrl+4 Show analyzer temperatures
Ctrl+G Print analyzer configuration
Ctrl+H Save analyzer configuration
Table 4-2 Keyboard shortcuts for the menu commands
To Next Page
Loading...
