SATO S84NX - Settings to Match the Media; Print Method (Combined Direct Thermal;Thermal Transfer Model Only)

135
Settings to Match the Media
Print Method (Combined Direct Thermal/Thermal Transfer Model Only)
For the combined direct thermal/thermal transfer model, you can select from two types of print
methods.
Thermal transfer
Prints using a ribbon.
Direct thermal
Prints using direct thermal media.
• Ribbon is not necessary if you are using direct thermal media.
You can set the print method by using the startup guide. Alternatively, the following procedure can be
used.
1.
Press the button or button in Online mode.
The product changes to Offline mode.