SATO S84NX - [Usb]

[USB]
222
Disabled
Disable the BCC check function.
[USB]
Set the USB connection.
The setting items are as follows:
[Flow Control]
Set the communication protocol.
The options are as follows:
• [Status4]
• [Status5]
• [None]
[BCC]
Enable or disable the BCC check function.
Appears only if you have selected [Status5] in the [Flow Control] menu.
The options are as follows:
Enabled
Enable the BCC check function.
Disabled
Disable the BCC check function.
[Change USB Serial]
Set the type of the USB serial number that the product returns.
The options are as follows:
Enabled
Returns the USB serial number (00000000).
This option is suitable when you want to replace the product without adding a new printer driver.
To do so, you need to set this setting to enabled before installing the product.
Disabled
Returns the factory set USB serial number (unique to each product).
This option is suitable when you want to set the printer driver for each product.
• If two products that have the same USB serial number connected to the same
computer, it may cause the computer to show a blue screen error.