309
Tools
Various settings and operations can be performed in this page: installing certificates for authentication,
checking the log, and test printing.
• Login is required to view the [Tools] page. Click [Login] to log in before opening the
[Tools] page.
The default setting for user is [settings], and for password is "PCB serial number (8
digits of uppercase English letters and numerals) +user". You can confirm the PCB
serial number from the [PCB Serial Number] item on [Device] on the [Dashboard] page
of the web configuration page; or by executing [Configure List] from the [Tools] > [Test
Print] menu.
(1) [Upload]
Click [Browse] of the certificate you want to install.
Select the certificate file from the list and click [Upload], and the authentication file will be
installed.
(2) [Clone]
You can do the setting equivalent to [Tools] > [Clone] in the Settings mode. Copy the current
product settings and the data that is installed.
(3) [Install Package]
Contact your SATO reseller or technical support for more information of the package file.
(4) [Logs]
List all log files in the log directory. Users can click to download the file.
(5) [Reset]
You can do the setting equivalent to [Tools] > [Reset] in the Settings mode. Initialize the setting
values and data saved on the product.
To Next Page
Loading...