Selecting the Barcode Check Mode
396
Enabling the Barcode Check
Selecting the Barcode Check Mode
The barcode check function has a readable mode and a comparison mode. You can switch the mode
or disable the function from the product's [Settings] menu.
• The barcode check function is available only when the print mode is set to continuous
mode. To use this function, select [Continuous] in the [Printing] > [Print Mode] menu.
1.
When the product is in Online mode, press the button on the operator panel to
change to Offline mode.
2.
Press the button to show the [Settings] menu.
3.
Press the / buttons to select [Tools], and then press the button.
To Next Page
Loading...