439
Cleaning Using the Cleaning Kit
The cleaning procedure using the cleaning kit is as follows:
• Never use organic solvents, such as thinner and benzine to clean the product.
• For details on the cleaning kit, refer to the manual attached to the cleaning kit.
1. Make sure that the product is powered off, and disconnect the power cord from the
AC outlet.
2. Open the top cover.
• Open the top cover fully to prevent accidental drop of the cover.
3. Turn the head lock lever (1) clockwise to unlock the print head.
• The print head and its surroundings are hot after printing. Be careful not to get burned.
• Touching the edge of the print head with your bare hand could cause injury.
To Next Page
Loading...