[Startup Guide]
296
[Save]
Save the log data to the USB memory.
Available only if there is log data in the product and if you have installed the USB memory.
• Be sure to perform a virus check on the USB memory before connecting it to the
product. SATO Corporation shall not be held responsible for any product malfunctions
caused by a virus spread via USB memory.
Press the button to copy the log data to the USB memory.
• The saved log data is strictly for the use of SATO authorized service personnel.
[Remove]
Delete the log data.
Press the button to delete the log data.
[Startup Guide]
The startup guide is a function to help you through the initial product settings (such as setting date and
time, and loading the ribbon and media).
Enable or disable the startup guide.
The options are as follows:
Enabled
Enable the startup guide.
Disabled
Disable the startup guide.
If you have selected [Enabled], the startup guide appears when you power on the product.
To Next Page
Loading...