79
Powering On the Product
• Do not power on or off the product, connect or disconnect the power cord while your
hands are wet. Doing so could cause an electric shock.
1. Press the power (I/O) switch to "I" position.
"Online" appears on the screen.
• When you power on the product for the first time after purchase or reboot after
resetting the settings, the startup guide appears. You can easily set the printing
preferences on the product by following the on-screen instructions.
• The screen that appears after you power on the product varies depending on the
settings.
◦ If [Start Online] in the [Printing] menu is disabled, the Offline screen appears.
◦ If [AEP] in the [Applications] menu is enabled, the application screen appears,
depending on the [Starting Application] setting.
To Next Page
Loading...