SATO S84NX - When to Replace Media and Ribbon; Checking the Remaining Amount of Media and Ribbon

141
When to Replace Media and Ribbon
Checking the Remaining Amount of Media and Ribbon
You can check the remaining amount of media and ribbon according to the following procedure.
• Checking through the window on the front side of the product
You can visually check the remaining amount of ribbon in the product through the window on the
front of the product (1).
• Checking through the notifications of the product
The product has near-end and end detection functions for the ribbon, and end detection for the
media.
Near-end detection of the media is also done by the sensor on the applicator.
With icons and error messages on the display of the product, you can check if you need to replace
the media or ribbon soon, or if the remaining amount of media and ribbon is scarce.