305
Dashboard
[Dashboard] is the default page for the web configuration page. Each section shows specific
information or the current status of the product.
(1) [Printer Status]
Shows the current state (online, offline, error) and current status icons.
(2) [Printing]
Shows the print speed, darkness, sensor, print mode and backfeed setting.
(3) [Device]
Shows the model, current resolution and options that are installed.
(4) [System]
Shows the current firmware version, uptime, SNMP contact, name and location.
(5) [Network]
Shows the current IP address and MAC address of the active interface.
• Click [Login] to log in for viewing.
The default setting for user is [settings], and for password is "PCB serial number (8
digits of uppercase English letters and numerals) +user". You can confirm the PCB
serial number from the [PCB Serial Number] item on [Device] on the [Dashboard] page
of the web configuration page; or by executing [Configure List] from the [Tools] > [Test
Print] menu.
To Next Page
Loading...