SATO S84NX - [Ipv4 Address]; [Ipv6 Address]; [Lan Mac]; [Wi-Fi MAC]

301
Belt 3
[Belt 1] shows the current distance the belt has fed.
When you replace the belt and the counter is cleared, the value of [Belt 2] appears in [Belt 3] and
the value of [Belt 1] appears in [Belt 2]. [Belt 1] will start to count from 0 again.
[Belt(Ribbon)]
Shows the current distance the ribbon timing belt has advanced the media in the eject direction.
Belt 1
Belt 2
Belt 3
[Belt 1] shows the current distance the belt has fed.
When you replace the belt and the counter is cleared, the value of [Belt 2] appears in [Belt 3] and
the value of [Belt 1] appears in [Belt 2]. [Belt 1] will start to count from 0 again.
[IPv4 Address]
Shows the IPv4 address.
[IPv6 Address]
Shows the IPv6 address.
• When Wi-Fi Direct is active, this IPv6 address screen does not appear.
[LAN MAC]
Shows the MAC address of the LAN.
Appears only if LAN is the active interface.
[Wi-Fi MAC]
Shows the MAC address of the wireless LAN.
Appears only if you have installed the optional wireless LAN and Wi-Fi is the active interface.
[Wi-Fi Region]
Shows the region information of the wireless LAN.
Appears only if you have installed the optional wireless LAN and Wi-Fi is the active interface.