[Sound]
264
[Change Belt]
Enable or disable the notification function about when the gearbox timing belt needs to be replaced.
The options are as follows:
Enabled
Enable the notification function.
Disabled
Disable the notification function.
[Belt Interval]
Set the notification interval about when the gearbox timing belt needs to be replaced.
You can change this setting if you have selected [Enabled] in the [Change Belt] menu.
The product shows the print distance as a set value. The setting range is from 10 to 300 km.
[Belt Count]
Shows the current distance the belt has advanced the media in the eject direction.
[Change Belt(Ribbon)]
Notify when the ribbon timing belt needs to be replaced.
The setting items are as follows:
[Change Belt]
Enable or disable the notification function about when the ribbon timing belt needs to be replaced.
The options are as follows:
Enabled
Enable the notification function.
Disabled
Disable the notification function.
[Belt Interval]
Set the notification interval about when the ribbon timing belt needs to be replaced.
You can change this setting if you have selected [Enabled] in the [Change Belt] menu.
The product shows the print distance as a set value. The setting range is from 10 to 300 km.
[Belt Count]
Shows the current distance the belt has advanced the media in the eject direction.
[Sound]
Set the buzzer sound.
The setting item is as follows:
To Next Page
Loading...