SATO S84NX - Operations in Linerless Mode

Operations in Linerless Mode
340
Operations in Linerless Mode
Linerless Mode, Backfeed Before Printing, with Media Sensor Disabled, and with
Pulse Input
Operation
*1 Feeds distance set for [Backfeed Offset]
*2 Actual print size in vertical direction
*3 Feeds total of distance set for [Feed Offset] and size specified by the End Position <EP> command
• The spaces between each layout varies depending on the print speed.
In the figure above, as you set the print speed faster, the space between the first and
second print becomes wider.
• You can set the [Feed Offset] and [Backfeed Offset] in the [Printing] > [Advanced]
menu.