SATO S84NX - [Sipl]

[SIPL]
248
[Caret]
Set the caret (^) code.
The setting range is from 0 to 255.
• You need to set different values for each code (caret, delimiter, tilde).
[Delimiter]
Set the delimiter (,) code.
The setting range is from 0 to 255.
• You need to set different values for each code (caret, delimiter, tilde).
[Tilde]
Set the tilde (~) code.
The setting range is from 0 to 255.
• You need to set different values for each code (caret, delimiter, tilde).
[Clock Format]
Set the date format.
The options are as follows (January 24, 2017, at 1:45 pm, for example):
• [(none)]
• [MM/DD/YY (24-hour clock)] (Example: 01/24/17 (13:45))
• [MM/DD/YY (12-hour clock)] (Example: 01/24/17 (01:45))
• [DD/MM/YY (24-hour clock)] (Example: 24/01/17 (13:45))
• [DD/MM/YY (12-hour clock)] (Example: 24/01/17 (01:45))
[Default Font]
Select a default font from the list for when printing using a multilingual font contained in the product.
[SIPL]
To use SIPL as a printer command, set the following items:
[Font Settings]
Set the font.
The setting items are as follows:
[Code Page]
Select the code page to be used from the list.