SATO S84NX - Page 247

247
[Shift]
Set the shift offset position of the label.
The setting range varies depending on the print resolution of the product.
The setting range is as follows:
Resolution S84NX S86NX
203 dpi
(1 dot = 0.125 mm
(0.0049"))
-832 to 0 to 832 dots -832 to 0 to 832 dots
305 dpi
(1 dot = 0.083 mm
(0.0033"))
-1248 to 0 to 1248 dots -1248 to 0 to 1248 dots
609 dpi
(1 dot = 0.042 mm
(0.0017"))
-2496 to 0 to 2496 dots -
• You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
[Top]
Set the top offset position of the label.
The setting range is from -120 to +120 dots.
• The length of 1 dot varies depending on the print resolution of the product.
◦ 203 dpi : 1 dot = 0.125 mm (0.0049")
◦ 305 dpi : 1 dot = 0.083 mm (0.0033")
◦ 609 dpi : 1 dot = 0.042 mm (0.0017")
• You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
[Label Rotation]
Set the page orientation for label printing.
The label size set in the product is used as a reference for rotation.
The options are as follows:
0 degree
Labels are printed in a portrait orientation.
180 degree
Labels are printed in an inverse-portrait orientation.