SATO S84NX - Interface; Supported Interfaces

Supported Interfaces
538
Interface
Supported Interfaces
For data communication with the host, the product supports the following interfaces.
Standard
• USB Interface (Type B)
• LAN Interface (Ethernet)
• NFC Interface
• USB Interface (Type A) x 2
• RS-232C Interface (DB 9 pins, female)
• External Signal (EXT) Interface (Amphenol 14 pins)
Option
• Wireless LAN Interface
RFID (S84NX only)
UHF (920 MHz)
ISO/IEC 18000-6 Type C Gen2
• Do not connect or disconnect the interface cables (or use a switch box) with power
supplied to either the product or host. This may cause damage to the interface circuitry
in the product or host and is not covered by warranty.
• Wireless LAN is an optional interface.
• You cannot use the wireless LAN interface and LAN interface at a time.
• You can set the interface settings of the product through [Interface] in the [Settings]
menu.