Adjusting the Print Darkness
358
Adjusting the Print Quality
Adjusting the Print Darkness
The adjustment procedure for the print darkness is as follows:
• You can fine tune the print darkness by setting the [Darkness Adjust] in the [Printing] >
[Advanced] > [Adjustments] menu.
• When the [Printing] > [Advanced] > [Prioritize] menu has been set to [Commands]
and the print darkness is specified by command, the data will be printed with the print
darkness specified by the command.
• You can adjust the print darkness during printing by registering the [Adjustments] menu
to the [Shortcut] menu in advance.
1.
When the product is in Online mode, press the button to change to Offline
mode.
2.
Press the button to show the [Settings] menu.
• Input the password if it is enabled.
To Next Page
Loading...