SATO S84NX - Usable Media

555
Usable Media
• Use our specified supply products.
Type
• Media roll (Face-in wound/face-out wound)
• Some RFID tags may cause paper jams because the tags rise up during backfeed.
Please check the performance of each RFID tag that you use. Be careful especially
when you use the RFID tags that are less than 27 mm (1.06") long in cold
environments.
Size
• Continuous
Item S84NX S86NX
Media Length
203 dpi
6 to 2500 mm (0.24" to 98.43")
305 dpi
6 to 1500 mm (0.24" to 59.01")
609 dpi
6 to 400 mm (0.24" to 15.75")
203 dpi
6 to 2500 mm (0.24" to 98.43")
305 dpi
6 to 1500 mm (0.24" to 59.01")
Media Length (With
Liner)
203 dpi
9 to 2503 mm (0.35" to 98.54")
305 dpi
9 to 1503 mm (0.35" to 59.17")
609 dpi
9 to 403 mm (0.35" to 15.87")
203 dpi
9 to 2503 mm (0.35" to 98.54")
305 dpi
9 to 1503 mm (0.35" to 59.17")
Media Width 10 to 128 mm (0.39" to 5.04") 51 to 177 mm (2.01" to 6.97")
Media Width (With
Liner)
13 to 131 mm (0.51" to 5.16") 54 to 180 mm (2.13" to 7.08")
*Above pitch and width are valid for die-cut labels. For media without liner, such as tags or non
die-cut labels, use the 'with liner' values.
• Dispenser