447
Cleaning Using the Cleaning Sheet
The cleaning procedure using the cleaning sheet is as follows:
1. Make sure that the product is powered off, and disconnect the power cord from the
AC outlet.
2. Open the top cover.
• Open the top cover fully to prevent accidental drop of the cover.
3. Turn the head lock lever (1) clockwise to unlock the print head.
• The print head and its surroundings are hot after printing. Be careful not to get burned.
• Touching the edge of the print head with your bare hand could cause injury.
4. Remove the media and ribbon if they are already loaded.
5. Place the cleaning sheet (2) between the print head and the platen roller.
To Next Page
Loading...