SATO S84NX - [Szpl]

[SZPL]
246
Enabled
Print the PDF417 code with the security level specified by the PDF417 printing command.
Disabled
Print the PDF417 code with the security level specified by the PDF417 (or higher) printing
command.
[Head Size] (S86NX Only)
Set the compatible mode in relation to the head size.
The options vary depending on the print resolution of the product.
The options are as follows:
Resolution Option Head Width
[Normal] 167.5 mm (6.59”)
[M8460Se] 152.0 mm (5.98”)
203 dpi
(1 dot = 0.125 mm
(0.0049"))
[M8485Se] 128.0 mm (5.04”)
[Normal] 167.5 mm (6.59”)305 dpi
(1 dot = 0.083 mm
(0.0033"))
[M8465Se] 152.0 mm (5.98”)
[Darkness]
Set the compatible mode used by the print darkness ESC+#E command.
The options are as follows:
Disabled
The print darkness ESC+#E command is ignored.
M8485/90/60/65Se
The print darkness level that is acquired by the [DC2]PB command and the print darkness level
that is displayed on screen become 3 times the value set by the ESC+#E command.
S84/M8459Se
The print darkness level that is acquired by the [DC2]PB command and the print darkness level
that is displayed on screen become 2 times the value set by the ESC+#E command.
[SZPL]
To use SZPL as a printer command, set the following items:
[Label]
Set the print position.
The setting items are as follows: