303
Configuring the Product Settings from a Web Browser
Accessing to the Web Configuration Page
The product can be operated through a web configuration page using any browser.
With an Ethernet LAN or WLAN connection, users can remotely get information from the product or
perform the product settings.
• You need the product's IP address to access the web configuration page. The
product's IP address can be checked in [Settings] > [Information] > [IPv4 Address].
• If the product's [Settings] > [Interface] > [Network] > [Advanced] > [Firewall] > [Enable]
menu is set to [Enabled], [Settings] > [Interface] > [Network] > [Advanced] > [Firewall] >
[Allow Services And Ports] > [WebConfig] must be set to [Enabled].
1. Open up the browser and enter the product's URL.
If the product's IP address is 192.168.143.123, enter the following URL: https://192.168.143.123
When a security certificate is prompted, you must acknowledge and click Continue.
The web configuration page for the product appears. On the upper right (1) of each page, the
model name, current resolution and MAC address are shown.
2. Log in.
You can view a part of the [Dashboard] page without logging in.
a. Click [Login] (2).
To Next Page
Loading...