SATO S84NX - Operations for RFID Write (S84 NX Only)

Operations for RFID Write (S84NX Only)
342
Operations for RFID Write (S84NX Only)
RFID Write with Continuous Mode (Tag Offset = 0) (S84NX Only)
*1 The EPC code write <IP0> command writes the data at this inlay position. The EPC code read,
RFID read [DC2]PJ, UID/EPC/IDm print <TU>, and UID/EPC/IDm return <RU> commands acquire the
information at this inlay position.