SATO S84NX - [Sbpl]

241
Disabled
Disable the SDPL printer language.
[SEPL]
Enable or disable the SEPL printer language.
The options are as follows:
Enabled
Enable the SEPL printer language.
Disabled
Disable the SEPL printer language.
[SBPL]
SBPL (SATO Barcode Printer Language) is the common command that controls SATO barcode label
printers.
To use SBPL as a printer command, set the following items:
[Show Error]
Enable or disable the command error indication when incorrect command or parameter is detected in
the print data.
The options are as follows:
Enabled
The error screen is displayed. The print operation is paused.
Disabled
The error screen is not displayed, but the command error status icon appears in the status bar.
[Standard Code]
Set the protocol code.
The options are as follows:
Enabled
Use a standard code.
Disabled
Use a non-standard code.
• A message prompting you to restart the product will appear on the Online/Offline
screen if you have made any changes. In such a case, reboot the product to apply the
settings. When [AUTO] is selected in the [Protocol] menu while [Disabled] is selected,
the setting will be changed to [Enabled].