SATO S84NX - [Interface] Menu; [Network]

179
[Interface] Menu
The following settings are available in the [Interface] menu:
• (S84NX only) The [RFID] menu appears only for the RFID models.
[Network]
This menu is for using LAN and wireless LAN for the interface between the computer and the product.
The setting items are as follows:
[Settings]
Set the LAN or wireless LAN, or select the interface.
• You cannot use LAN and wireless LAN at the same time. The wireless LAN function is
available only if you have installed the wireless LAN.
The setting items are as follows:
[LAN]
Set the IPv4, IPv6 or proxy for the LAN.
The setting items are as follows:
[IPv4]
Set IPv4 for the LAN.
•
After doing the settings, press the button to enable the new settings. Press
the button to cancel the new settings and return to the previous settings.