SATO S84NX - [Applications]; [Installation Log]; [Print Module]

299
Name
Shows the name of the build version.
Date
Shows the build date.
Checksum
Shows the checksum of the build version.
Kernel Version
Shows the kernel version of the product.
Boot Version
Shows the boot version of the product.
[Applications]
Shows the versions of the applications installed in the product, such as printer languages.
[Installation Log]
Show or clear the installation log data in the product.
Press the button (CLEAR) to clear the selected log data.
• This screen does not appear if there is no log data in the product.
The setting items are as follows:
[RPM log]
Shows a list of RPM log files containing three sections: installed, updated and obsolete.
The RPM log file is created after installing a pkg-file containing rpm-files.
[System Restore]
Shows the system restore log.
The system restore log file is created after installing a pkg-file that caused a state in which the
product's operator panel cannot be operated.
[Print Module]
Shows information about the print module on the product.
The items are as follows:
Boot
Shows the Boot firmware version.