379
Loading the RFID Tag Model
By registering settings, such as the antenna positions and writing/reading frequency outputs for each
RFID tag you are using, you can easily change the product's settings when you switch RFID tags.
RFID tag models can be selected from the [Interface] > [RFID] > [RFID Tag Model] > [Load] menu and
applied to the product.
The procedure to load the RFID tag model is as follows:
1.
When the product is in Online mode, press the button on the operator panel to
change to Offline mode.
2.
Press the button to show the [Settings] menu.
3.
Press the / buttons to select [Interface], and then press the button.
To Next Page
Loading...