73
• The encircled positions show the 5 holes for installing the product in the support structure.
• The figure above is the Standard/Left-hand type. If you are using the Opposite/Right-hand type,
then the direction is the opposite.
Media Dispensed View
Make sure that there is sufficient space around the product so that the top cover can be fully opened
when operating or cleaning the product, or replacing consumables.
The dimensions of the media dispensed view of the product are as follows:
S84NX
• The figure above is the Standard/Left-hand type. If you are using the Opposite/Right-hand type,
then the direction is the opposite.
To Next Page
Loading...