Replacing the Pressure Roller
458
Replacing the Pressure Roller
You can easily remove and replace a damaged or worn pressure roller.
• Do not power on or off the product, connect or disconnect the power cord while your
hands are wet. Doing so could cause an electric shock.
• Disconnect the power cord from the AC outlet before you replace the pressure roller.
Required tool
• Phillips screwdriver
1. Make sure that the product is powered off, and disconnect the power cord from the
AC outlet.
2. Open the top cover.
• Open the top cover fully to prevent accidental drop of the cover.
3. Turn the head lock lever (1) clockwise to unlock the print head.
• The print head and its surroundings are hot after printing. Be careful not to get burned.
• Touching the edge of the print head with your bare hand could cause injury.
To Next Page
Loading...