SATO S84NX - Settings

307
Settings
The settings equivalent to the product's Settings mode can be performed on the browser.
• Login is required to view the [Settings] page. Click [Login] to log in before opening the
[Settings] page.
The default setting for user is [settings], and for password is "PCB serial number (8
digits of uppercase English letters and numerals) +user". You can confirm the PCB
serial number from the [PCB Serial Number] item on [Device] on the [Dashboard] page
of the web configuration page; or by executing [Configure List] from the [Tools] > [Test
Print] menu.
(1) [Printing]
You can do the settings equivalent to the [Printing] menu in the Settings mode.
(2) [Interface]
You can do the settings equivalent to the [Interface] menu in the Settings mode.
(3) [Applications]
You can do the settings equivalent to the [Applications] menu in the Settings mode.
(4) [System]
You can do the settings equivalent to the [System] menu in the Settings mode.
(5) [Tools]
You can do the settings equivalent to the [Tools] menu in the Settings mode.
(6) [Information]
You can do the settings equivalent to the [Information] menu in the Settings mode.