Dashboard
306
(6) [Wi-Fi]
Shows the current Wi-Fi setting.
• Click [Login] to log in for viewing.
The default setting for user is [settings], and for password is "PCB serial number (8
digits of uppercase English letters and numerals) +user". You can confirm the PCB
serial number from the [PCB Serial Number] item on [Device] on the [Dashboard] page
of the web configuration page; or by executing [Configure List] from the [Tools] > [Test
Print] menu.
• This information is shown only if Wi-Fi is available and active.
(7) [Wi-Fi Strength]
Shows the current Wi-Fi communication strength.
• If the product is P2P GO, the Wi-Fi Strength will not be shown.
To Next Page
Loading...