81
Powering Off the Product
• Do not power on or off the product, connect or disconnect the power cord while your
hands are wet. Doing so could cause an electric shock.
• Do not power off the product during operation, such as when printing or updating.
Doing so could cause a malfunction of the product.
• Do not disconnect the power cord until the powering off process is completed on the
product.
• An incorrect power on/off operation may change or initialize the product's settings.
1. Make sure that the product is in Offline mode before you power off.
If "Online" appears on the screen, press the button or button to change to Offline
mode.
2. Press the power (I/O) switch to "O" position.
To Next Page
Loading...