Media Sensor Type
138
Media Sensor Type
The product adjusts the print position precisely by detecting I-marks or gaps on the media (label) using
media sensors.
The I-marks or gaps on each type of media are as follows:
I-mark label Gap label I-mark journal paper/
linerless label
(1) Media feed direction
Set the sensor type to detect the print position according to the media to be used.
You can set the sensor type by using the startup guide. Alternatively, the following procedure can be
used.
1.
Press the button or button in Online mode.
The product changes to Offline mode.
To Next Page
Loading...