SATO S84NX - [Information] Menu

435
Initial ValueSetting Item
S84NX S86NX
Initialized
by User
Reset/
Factory
Reset
[Host Notification] [Disabled] Yes/Yes
[Logs]
[Copy] - -
[Remove] - -
[Clone] [Excl. LAN/Wi-Fi/IP/
Bluetooth]
-
[Clone Notice Setting] [Disabled] Yes/Yes
[Support Info] - -
[Logging Function]
[Enabled] [Disabled] Yes/Yes
[Save] - -
[Delete] - -
[Startup Guide] [Enabled] No/Yes
[Information] Menu
Initial values refer to the values set for the product when it was shipped from the factory. If you reset
the product, the values set in the product are initialized. The table below shows the initial value of each
setting item and whether it would be initialized.
• Normally, it is not necessary to perform the initialization. Doing an initialization removes
all the product's settings that the customer changed.
Initial ValueSetting Item
S84NX S86NX
Initialized
by User
Reset/
Factory
Reset
[Help] - -
[Build Version] - -
[Applications] - -
[Installation Log] - -
[Print Module] - -