SATO S84NX - Page 434

[Tools] Menu
434
Initial ValueSetting Item
S84NX S86NX
Initialized
by User
Reset/
Factory
Reset
[Darkness Adjust] 50 No/No
[HEX-Dump]
[Hex Dump Mode] [Disabled] Yes/Yes
[Reset]
[Profiles]
[Delete] - -
[Load] - -
[Save] - -
[Start with] - Yes/Yes
[Certificates] - Yes/Yes
[Barcode Checker]
[Test]
[Reader Name] - -
[Reading Test] - -
[Interface] [RS-232C] Yes/Yes
[Settings]
[Mode] [Disabled] Yes/Yes
[Set No. of Barcodes] [Command] Yes/Yes
[Barcodes per Label] 1 Yes/Yes
[Start Position]
203 dpi
72 dots
305 dpi
108 dots
609 dpi
216 dots
203 dpi
72 dots
305 dpi
108 dots
Yes/Yes
[VOID Print] [Disabled] Yes/Yes
[Retry Count] 0 Yes/Yes