SATO S84NX - [Nfc]; [Ignore CR;LF]; [Ignore CAN;DLE]; [External I;O]

223
[NFC]
Sets the NFC connection.
The setting item is as follows:
[I/F Enable]
Enables or disables the NFC interface.
The options are as follows:
Enabled
Enables the NFC interface.
Disabled
Disables the NFC interface.
[Ignore CR/LF]
Set whether to ignore the CR/LF code (0x0D / 0x0A) in the received data.
The options are as follows:
Enabled
Ignore the CR/LF code.
Disabled
Do not ignore the CR/LF code.
[Ignore CAN/DLE]
Set whether to ignore the CAN/DLE code (0x18 / 0x10) in the received data.
The options are as follows:
Enabled
Ignore the CAN/DLE code.
Disabled
Do not ignore the CAN/DLE code.
[External I/O]
Use the external (EXT) terminal as an interface between the external device and the product.
The setting items are as follows: