[Network]
180
• You cannot change [IP Address], [Netmask], [Gateway], or [DNS] when [Mode] is
[DHCP].
The setting items are as follows:
[Mode]
Select the IP address assignment method.
The options are as follows:
DHCP
Automatically retrieve the IP address, gateway and subnet mask from the DHCP server.
Static
Manually set the IP address, gateway and subnet mask.
[DHCP]
Update the lease time and get the IP address from the DHCP server again.
Appears only if you have selected [DHCP] in the [Mode] menu and LAN is the active interface.
Does not appear if the wireless LAN is the active interface.
[IP Address]
If you have selected [Static] in the [Mode] menu, set the IP address.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
[Netmask]
If you have selected [Static] in the [Mode] menu, set the subnet mask address.
Each group of the address can be set cyclically among 0, 128, 192, 224, 240, 248, 252, 254 and 255.
The setting range is as follows:
128.000.000.000 to 255.255.255.254
[Gateway]
If you have selected [Static] in the [Mode] menu, set the default gateway address.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
[DNS]
If you have selected [Static] in the [Mode] menu, set and check DNS server addresses.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
• You can register up to three IP addresses for the DNS server. Use a comma to delimit
different IP addresses.
To Next Page
Loading...