357
Resolution S84NX S86NX
609 dpi
(1 dot = 0.042
mm (0.0017"))
-90 to +90 dots -
• Do not allow the distance between [Pitch] and [Offset] after adjustments to exceed the
size of 1 label (including liner).
• You can change the units to dots, " (inches), or mm in the [System] > [Regional] >
[Unit] menu.
6.
Press the button to save the setting value.
7.
Press the button to change to Offline mode.
8.
Press the button again to change to Online mode.
You can print to check the adjusted dispenser stop position.
To Next Page
Loading...