SATO S84NX - Page 356

Adjusting the Dispenser Stop Position
356
• Input the password if it is enabled.
3.
Select [Printing] using the / buttons, and then press the button.
4.
Select the [Advanced] > [Adjustments] > [Offset] menu using the / buttons,
and then press the button.
The [Offset] screen appears.
5.
Change the setting value. Press the / / / buttons to select a number
and then press the button to enter the number to the text box.
The setting range is as follows:
Resolution S84NX S86NX
203 dpi
(1 dot = 0.125
mm (0.0049"))
-30 to +30 dots -30 to +30 dots
305 dpi
(1 dot = 0.083
mm (0.0033"))
-45 to +45 dots -45 to +45 dots