249
[New Font Encoding]
Enable or disable new font encoding.
The options are as follows:
Enabled
Enable new font encoding.
Disabled
Disable new font encoding.
• Contact your SATO sales representative for more information about the new font.
[c20 Proportional Pitch]
Set whether to print each character using a proportional pitch or fixed pitch.
The options are as follows:
Enabled
Print each character with a proportional pitch.
Disabled
Print all characters with a fixed pitch.
[Zero Slash]
Set whether to print the number zero (0) with or without a slash (/).
The options are as follows:
Enabled
Print zero with a slash.
Disabled
Print zero without a slash.
[Format Save]
Set whether to save the user format data registered at printing in the product.
The options are as follows:
Enabled
Save the user format data registered at printing in the product.
Disabled
Do not save the user format data registered at printing in the product. The user format data
remains in the product memory after printing until the product is powered off. You need to register
a user format again after reboot.
To Next Page
Loading...